NORWAY · WELLBORES · NPDID 193

8/12-1

Exploration · Wildcat · P&A · Dry · Conoco Norway Inc. · PL 014

9 documents: reports, logs, and plots →

Core 2

Core 2 of 8/12-1 was cut from 8,811 to 8,817.5 ft, 6.5 ft in the Sandnes Fm. The Directorate lists core samples from it as available.

6.5
ft cored · 8,811 to 8,817.5
1
palynology slide made from core
7
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 2,685.6 TO 2,687.6 M

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS8,8118,817.5 ftSandnes Fm, 2,685.6 to 2,687.6 mSandnes FmCore 2, 8,811 to 8,817.5 ftCore 26.5 ft30.9 m not cored

What it was cut through

UnitFrom, mTo, mCore in it, m
Sandnes Fm2,685.62,687.62

Every formation top in 8/12-1 →

Palynology slides made from core

1 IN THE INTERVAL

DepthLab codeIn
8,817 ftSTRATSandnes Fm

Logs run across it

7 RUNS COVERING PART OF THE INTERVAL

  • BHC GRborehole-compensated sonic · gamma ray320 to 2,872 m
  • IESinduction electrical survey333 to 2,874 m
  • PROX MLmicrolog762 to 2,872 m
  • FDCcompensated formation density1,601 to 2,874 m
  • SNPsidewall neutron porosity1,900 to 2,874 m
  • HDThigh-resolution dipmeter1,902 to 2,874 m
  • LL-7laterolog1,902 to 2,872 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/193/cores/2, documented in the API reference.