NORWAY · WELLBORES · NPDID 1989
30/9-B-18
Development · Observation · Plugged · Not applicable · Norsk Hydro Produksjon AS · Oseberg · PL 079
Core 2
Core 2 of 30/9-B-18 was cut from 3,893 to 3,903.2 m, 10.2 m in the Oseberg Fm. The Directorate lists core samples from it as available.
- 10.2
- m cored · 3,893 to 3,903.2
- 4
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Oseberg Fm | 3,893 | 3,903.2 | 10.2 |
Logs run across it
4 RUNS COVERING PART OF THE INTERVAL
- VSPvertical seismic profile250 to 3,960 m
- MWD - DPR DGmeasurement while drilling · dual propagation resistivity1,162 to 3,980 m
- PI LSS LDL CNL GRlong-spaced sonic · litho-density log · compensated neutron log · gamma ray3,338 to 3,960 m
- RFT HP GRrepeat formation tester · gamma ray3,688 to 3,934 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/1989/cores/2, documented in the API reference.