NORWAY · WELLBORES · NPDID 201

25/4-5

Exploration · Appraisal · P&A · Oil/gas · Elf Petroleum Norge AS · Heimdal · PL 036

8 documents: reports, logs, and plots →

Core 12

Core 12 of 25/4-5 was cut from 3,954.5 to 3,970.5 m, 16 m in the Statfjord Gp. The Directorate lists core samples from it as available.

16
m cored · 3,954.5 to 3,970.5
1
test or fluid sample across it
5
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS3,954.53,970.5 m3,9563,9583,9603,9623,9643,9663,968Statfjord Gp, 3,954.5 to 3,970.5 mStatfjord GpCore 12, 3,954.5 to 3,970.5 mCore 1216 m1 m not cored

What it was cut through

UnitFrom, mTo, mCore in it, m
Statfjord Gp3,954.53,970.516

Every formation top in 25/4-5 →

Tests and fluid samples across it

  • DST 33,969 to 3,999 mOil 0 Sm³/d · gas 0 Sm³/d

Full test results for the well →

Logs run across it

5 RUNS COVERING PART OF THE INTERVAL

  • ISF BHC GRinduction spherically focused log · borehole-compensated sonic · gamma ray267 to 4,355 m
  • FDC CNL GRcompensated formation density · compensated neutron log · gamma ray866 to 4,355 m
  • HDThigh-resolution dipmeter3,590 to 4,355 m
  • NGTnatural gamma ray spectrometry3,590 to 4,355 m
  • DLL MSFLdual laterolog · micro-spherically focused log3,594 to 4,253 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/201/cores/12, documented in the API reference.