NORWAY · WELLBORES · NPDID 201
25/4-5
Exploration · Appraisal · P&A · Oil/gas · Elf Petroleum Norge AS · Heimdal · PL 036
Core 3
Core 3 of 25/4-5 was cut from 2,154.5 to 2,158 m, 3.5 m in the Heimdal Fm. The Directorate lists core samples from it as available.
- 3.5
- m cored · 2,154.5 to 2,158
- 11
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Heimdal Fm | 2,154.5 | 2,158 | 3.5 |
Logs run across it
11 RUNS COVERING PART OF THE INTERVAL
- ISF BHC GRinduction spherically focused log · borehole-compensated sonic · gamma ray267 to 4,355 m
- CBL VDL GRcement bond log · variable density log · gamma ray425 to 2,817 m
- FDC CNL GRcompensated formation density · compensated neutron log · gamma ray866 to 4,355 m
- BHC GRborehole-compensated sonic · gamma ray1,400 to 2,188 m
- CBL VDL GRcement bond log · variable density log · gamma ray1,550 to 3,584 m
- HDThigh-resolution dipmeter1,916 to 2,814 m
- BGTborehole geometry tool1,950 to 2,821 m
- DLL MSFLdual laterolog · micro-spherically focused log1,950 to 2,235 m
- HDThigh-resolution dipmeter1,950 to 2,821 m
- LDT CNLlitho-density tool · compensated neutron log1,950 to 2,821 m
- NGTnatural gamma ray spectrometry1,950 to 2,820 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/201/cores/3, documented in the API reference.