NORWAY · WELLBORES · NPDID 2049

7128/4-1

Exploration · Wildcat · P&A · Oil/gas · Den norske stats oljeselskap a.s · PL 180

7 documents: reports, logs, and plots →

Core 5

Core 5 of 7128/4-1 was cut from 2,526 to 2,528.5 m, 2.5 m in the Basement. The Directorate lists core samples from it as available.

2.5
m cored · 2,526 to 2,528.5
1
photograph
1
thin section in the interval
1
log run across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,5262,528.5 mBasement, 2,526 to 2,528.5 mBasementCore 5, 2,526 to 2,528.5 mCore 52.5 m2,526 to 2,529 m: 1 photo. Open.1

Photographs of this core

1 PHOTO · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

What it was cut through

UnitFrom, mTo, mCore in it, m
Basement2,5262,528.52.5

Every formation top in 7128/4-1 →

Thin sections in this interval

1 ON FILE

SectionDepthIn
24972,528 mBasement

Palynology slides made from core

0 IN THE INTERVAL

1 more slide was made from cuttings or sidewall cores at depths inside this interval, not from the core itself. Every slide from the well →

Logs run across it

1 RUN COVERING PART OF THE INTERVAL

  • DIFL ACL ZDL GRdual induction focused log · acoustic log · compensated Z-densilog · gamma ray2,432 to 2,530 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/2049/cores/5, documented in the API reference.