NORWAY · WELLBORES · NPDID 2113
7/7-3
Exploration · Appraisal · P&A · Shows · Den norske stats oljeselskap a.s · Brynhild · PL 148
Core 2
Core 2 of 7/7-3 was cut from 3,489.3 to 3,490 m, 0.8 m in the Farsund Fm. The Directorate lists core samples from it as available.
- 0.8
- m cored · 3,489.3 to 3,490
- 1
- photograph
- 1
- palynology slide made from core
- 7
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
1 PHOTO · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Farsund Fm | 3,489.3 | 3,490 | 0.8 |
Palynology slides made from core
1 IN THE INTERVAL
| Depth | Lab code | In |
|---|---|---|
| 3,489.5 m | STATO | Farsund Fm |
Logs run across it
7 RUNS COVERING PART OF THE INTERVAL
- MWD - GR RES DIRmeasurement while drilling · gamma ray · resistivity · directional survey172 to 3,584 m
- VSPvertical seismic profile510 to 3,547 m
- DIFL ACL MLL GR CALdual induction focused log · acoustic log · microlaterolog · gamma ray · caliper3,340 to 3,587 m
- DIPS GRgamma ray3,340 to 3,578 m
- ZDL CNL GRcompensated Z-densilog · compensated neutron log · gamma ray3,340 to 3,587 m
- COREGUNsidewall core gun3,354 to 3,540 m
- FMT CHT GRformation multi-tester · cable head tension · gamma ray3,497 to 0 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/2113/cores/2, documented in the API reference.