NORWAY · WELLBORES · NPDID 2136

7/4-1

Exploration · Wildcat · P&A · Dry · Den norske stats oljeselskap a.s · PL 148

5 documents: reports, logs, and plots →

Core 2

Core 2 of 7/4-1 was cut from 3,015 to 3,023.6 m, 8.6 m in the Farsund Fm. The Directorate lists core samples from it as available.

8.6
m cored · 3,015 to 3,023.6
2
photographs
3
palynology slides made from core
5
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS3,0153,023.6 m3,0163,0183,0203,022Farsund Fm, 3,015 to 3,023.6 mFarsund FmCore 2, 3,015 to 3,023.6 mCore 28.6 m3,015 to 3,020 m: 1 photo. Open.13,020 to 3,023 m: 1 photo. Open.145.4 m not cored

Photographs of this core

2 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

What it was cut through

UnitFrom, mTo, mCore in it, m
Farsund Fm3,0153,023.68.6

Every formation top in 7/4-1 →

Palynology slides made from core

3 IN THE INTERVAL

DepthLab codeIn
3,015 mSTATOFarsund Fm
3,019.5 mSTATOFarsund Fm
3,023.5 mSTATOFarsund Fm

Logs run across it

5 RUNS COVERING PART OF THE INTERVAL

  • MWDmeasurement while drilling105 to 3,133 m
  • VSPvertical seismic profile1,480 to 3,130 m
  • DIFL ACL ZDL GR CN CBLdual induction focused log · acoustic log · compensated Z-densilog · gamma ray · compensated neutron · cement bond log2,969 to 3,111 m
  • DIPS GRgamma ray2,969 to 3,130 m
  • SWC GRsidewall cores · gamma ray2,974 to 3,126 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/2136/cores/2, documented in the API reference.