Core 2
Core 2 of 3/7-2 was cut from 2,575.5 to 2,588.8 m, 13.3 m in the Ekofisk Fm. The Directorate lists core samples from it as available.
- 13.3
- m cored · 2,575.5 to 2,588.8
- 4
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Ekofisk Fm | 2,575.5 | 2,588.8 | 13.3 |
Logs run across it
4 RUNS COVERING PART OF THE INTERVAL
- CBLcement bond log2,300 to 3,012 m
- LDL CNL GR CALlitho-density log · compensated neutron log · gamma ray · caliper2,553 to 3,026 m
- HDThigh-resolution dipmeter2,554 to 3,026 m
- ISF SONIC NGTinduction spherically focused log · sonic · natural gamma ray spectrometry2,554 to 3,027 m
Core and petrography reports on file for the well
- Core description core 1-5pdf · 146 KB
- Preliminary report core 1-4pdf · 457 KB
- Sidewall cores descriptionpdf · 2 MB
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/220/cores/2, documented in the API reference.