NORWAY · WELLBORES · NPDID 225

2/7-15

Exploration · Appraisal · P&A · Oil · Phillips Petroleum Company Norway · Eldfisk · PL 018

7 documents: reports, logs, and plots →

Core 3

Core 3 of 2/7-15 was cut from 11,474 to 11,514 ft, 40 ft in the Ran Sandstone Units and Åsgard Fm. The Directorate lists core samples from it as available.

40
ft cored · 11,474 to 11,514
1
formation boundary crossed
4
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 3,497.3 TO 3,509.5 M

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS11,47411,514 ft11,48011,48511,49011,49511,50011,50511,510Ran Sandstone Units, 3,497.3 to 3,498 mÅsgard Fm, 3,498 to 3,509.5 mÅsgard FmCore 3, 11,474 to 11,514 ftCore 340 ft

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Ran Sandstone Units3,497.33,4980.7
Åsgard Fm3,4983,509.511.5

Every formation top in 2/7-15 →

Logs run across it

4 RUNS COVERING PART OF THE INTERVAL

  • VELOCITYvelocity (check-shot) survey1,369 to 4,420 m
  • DLL BHC GR CALdual laterolog · borehole-compensated sonic · gamma ray · caliper3,179 to 3,683 m
  • FDC CNL GR CALcompensated formation density · compensated neutron log · gamma ray · caliper3,179 to 3,684 m
  • HDThigh-resolution dipmeter3,179 to 3,702 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/225/cores/3, documented in the API reference.