NORWAY · WELLBORES · NPDID 2299
6507/2-3
Exploration · Wildcat · P&A · Oil shows · Norsk Hydro Produksjon AS · PL 122
Core 3
Core 3 of 6507/2-3 was cut from 3,254 to 3,263.8 m, 9.8 m in the Lange Fm. The Directorate lists core samples from it as available.
- 9.8
- m cored · 3,254 to 3,263.8
- 2
- photographs
- 2
- thin sections in the interval
- 2
- palynology slides made from core
- 6
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
2 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Lange Fm | 3,254 | 3,263.8 | 9.8 |
Thin sections in this interval
2 ON FILE
Palynology slides made from core
2 IN THE INTERVAL
Logs run across it
6 RUNS COVERING PART OF THE INTERVAL
- VSPvertical seismic profile1,600 to 3,690 m
- MWD RGD - GR RESmeasurement while drilling · gamma ray · resistivity3,044 to 3,970 m
- DLL MSFL DSI AMS SPdual laterolog · micro-spherically focused log · dipole shear sonic imager · auxiliary measurement sonde · spontaneous potential3,047 to 3,700 m
- FMS LDL CNL AMS GRformation microscanner · litho-density log · compensated neutron log · auxiliary measurement sonde · gamma ray3,047 to 3,695 m
- FMS LDL CNL AMS FMSformation microscanner · litho-density log · compensated neutron log · auxiliary measurement sonde3,170 to 3,300 m
- RFT HP GRrepeat formation tester · gamma ray3,172 to 3,281 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/2299/cores/3, documented in the API reference.