NORWAY · WELLBORES · NPDID 241

1/6-3

Exploration · Appraisal · P&A · Gas/condensate · A/S Norske Shell · Albuskjell · PL 011

3 documents: reports, logs, and plots →

What was run in 1/6-3 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

Logs you can open: composite and completion logs on file

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
VELOCITYVELOCITY velocity (check-shot) survey913,324
GRGR gamma ray100418
IESIES induction electrical survey4173,341
BHCBHC borehole-compensated sonic4181,229
TEMPTEMP temperature6401,829
BHC-CBHC borehole-compensated sonic1,2213,341
CDM1,2213,192
CBLCBL cement bond log2,1343,300
TEMPTEMP temperature2,3163,277
FDC CNLFDC compensated formation density · CNL compensated neutron log2,4493,342
FDC CNLFDC compensated formation density · CNL compensated neutron log2,8963,193
CCLCCL casing collar locator3,2713,296

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30175361750LOT
Surf.cond.20417264250LOT
Interm.13 3/81,22017 1/21,2300LOT
Interm.9 5/82,44612 1/42,4520LOT
Liner73,3208 1/23,3250LOT

Drilling mud

7 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
1781.0400seawater
3551.200viscous mud
1,2301.4300waterbased
2,4521.7300waterbased
3,0621.7900waterbased
3,2611.7400waterbased
3,3251.7500waterbased

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/241, documented in the API reference.