NORWAY · WELLBORES · NPDID 2445
6506/12-10
Exploration · Appraisal · P&A · Shows · Den norske stats oljeselskap a.s · Åsgard · PL 094
Core 2
Core 2 of 6506/12-10 was cut from 4,592.2 to 4,616 m, 23.8 m in the Garn Fm and Not Fm. The Directorate lists core samples from it as available.
- 23.8
- m cored · 4,592.2 to 4,616
- 5
- photographs
- 1
- formation boundary crossed
- 9
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
5 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
Logs run across it
9 RUNS COVERING PART OF THE INTERVAL
- ZOVSP MLRG SRzero-offset vertical seismic profile1,500 to 5,075 m
- MWD DPRmeasurement while drilling · dual propagation resistivity2,158 to 4,811 m
- DCBIL GRgamma ray3,730 to 5,091 m
- MAC GRmultipole array acoustic · gamma ray3,730 to 5,091 m
- DIFL ACL ZDL CN CHT GRdual induction focused log · acoustic log · compensated Z-densilog · compensated neutron · cable head tension · gamma ray4,545 to 4,845 m
- DPIL MAC DSLdual phase induction log · multipole array acoustic · digital spectral gamma ray4,546 to 5,091 m
- ZDL CN DEL2 GRcompensated Z-densilog · compensated neutron · gamma ray4,546 to 5,091 m
- ZDL MAC DSLcompensated Z-densilog · multipole array acoustic · digital spectral gamma ray4,546 to 5,092 m
- FMT VPC QDYNE GRformation multi-tester · gamma ray4,565 to 4,779 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/2445/cores/2, documented in the API reference.