NORWAY · WELLBORES · NPDID 2517
34/10-38 S
Exploration · Appraisal · P&A · Oil/gas · Den norske stats oljeselskap a.s · Gullfaks Sør · PL 050
34/10-38 S is an appraisal exploration wellbore in the North Sea, drilled by Den norske stats oljeselskap a.s, entered Apr 5, 1995, to 3,940 m in the Lunde Fm.
Discovery 34/10-17 Rimfaks · On the map →
- 3,940
- m total depth · 3,393 m vertical
- 137
- m water depth
- Apr 5, 1995
- entered · completed May 29, 1995
- Lunde Fm
- at total depth · Late Triassic
- 160.2
- m of core in 9 cores
- 124
- °C bottom-hole temperature
SODIR FACTPAGES · RECORD UPDATED NOV 4, 2026 · RELEASED MAY 29, 1997
On file for this wellbore
What the Directorate holds from this wellbore. Each opens the section that lists it.
Drilling
- Drilling facility
- DEEPSEA BERGEN decom · Semisub steel
- Drilling days
- 55
- Kelly bushing elevation
- 23 m
- Maximum inclination
- 58.20000076°
- Drilling permit
- 805-L
- Licensing round
- Awarded additionally to round 3
- Plugged and abandoned
- —
- Core samples available
- Yes
- Cuttings samples available
- Yes
- Position · ED50
- 61.07313° N, 2.02699° E
- Hydrocarbons in
- Brent Gp · Middle Jurassic
- Hydrocarbons in
- Cook Fm · Early Jurassic
- Hydrocarbons in
- Statfjord Gp · Early Jurassic
Well history
WRITTEN BY THE NORWEGIAN OFFSHORE DIRECTORATE
General
Well 34/10-38 S was drilled to appraise the 34/10-17 Rimfaks Discovery south-west of the Gullfaks field in the North Sea. The primary objective was to test the hydrocarbon potential of the Middle Jurassic Brent Group in Segment 1 of the structure. Secondary objective was to test the hydrocarbon potential of the Early Jurassic Statfjord Group in Segment 2.
Operations and results
Appraisal well 34/10-38 S was spudded with the semi-submersible installation Deepsea Bergen on 5 April 1995 and drilled to TD at 3940 m (3393 m TVD) in the Late Triassic Lunde Formation. Drilling went forth without significant problem. Lost time was mostly related to logging problems in the 8 1/2" section. The well was drilled with bentonite and CMC/EHV down to 670 m, with ANCO 2000 mud from 670 m to 2075 m and with oil based Safemul PE/SE mud from 2075 m to TD.
The results of the well differed from the geological prognosis. The Viking Group and most of the Brent Group in segment 2 was eroded and the remaining of the Brent Group was heavily faulted and fractured. Top Brent Group came in at 3021 m (2653.8 m TVD). Top Statfjord Group was penetrated at 3451 m (2995.2 m TVD), about 200 m shallower than prognosed. The Brent Group, the Cook Formation and the Statfjord Group proved to be hydrocarbon bearing. Pressure samples and log analysis proved an oil-water contact at 3585.6 m (3103.5 m TVD) in the Statfjord Group. Shows and log analysis indicated, however, oil with low saturation down to approx, 3658 m.
Nine cores were cut in the well. The first core was cut from 3140 to 3159 m but recovered only a 10 cm piece. Cores 2 to 9 were cut in the Statfjord Group from 3465 m to 3631 m with generally good
Around this wellbore
This wellbore on Sodir FactPages →
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Depths are metres along the wellbore from the kelly bushing unless a row gives its own unit; older cores are filed in feet. A zero the Directorate files for an unmeasured pressure, density, or temperature is shown as a dash.
Developers: this page as JSON is GET /v1/data/norway/wells/2517, documented in the API reference.