NORWAY · WELLBORES · NPDID 252
2/4-8
Exploration · Appraisal · P&A · Oil · Phillips Petroleum Company Norway · Tor · PL 018
Core 2
Core 2 of 2/4-8 was cut from 9,820 to 9,846 ft, 26 ft in the Ekofisk Fm. The Directorate lists core samples from it as available.
- 26
- ft cored · 9,820 to 9,846
- 1
- test or fluid sample across it
- 10
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 2,993.1 TO 3,001.1 M
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Ekofisk Fm | 2,993.1 | 3,001.1 | 7.9 |
Tests and fluid samples across it
- DST 72,996 to 3,002 mOil 71 Sm³/d · gas 133,906 Sm³/d
Logs run across it
10 RUNS COVERING PART OF THE INTERVAL
- IESinduction electrical survey479 to 4,076 m
- VELOCITYvelocity (check-shot) survey479 to 3,721 m
- TS1,372 to 3,619 m
- BHC Cborehole-compensated sonic1,611 to 4,076 m
- CBLcement bond log1,829 to 3,700 m
- GR Ngamma ray2,956 to 3,703 m
- DL2,980 to 3,731 m
- FDCcompensated formation density2,980 to 3,726 m
- SNPsidewall neutron porosity2,980 to 4,076 m
- ML MLLmicrolog · microlaterolog2,982 to 3,677 m
Core and petrography reports on file for the well
- 8(8X) Biostratigraphy of Core Samplespdf · 1.3 MB
- 8(8AX) Additional Conventional Core Analysispdf · 179 KB
- 8(8AX) Core Analysis Resultpdf · 1.7 MB
- 8(8AX) Core Lithological Descriptionspdf · 478 KB
- 8(8AX) Petrography of Selected Samples Danianpdf · 17.8 MB
- 8(8AX) Special Core Analysis Studypdf · 3.3 MB
- 8(8AX) XRD Analysis of Selected Samplespdf · 335 KB
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/252/cores/2, documented in the API reference.