NORWAY · WELLBORES · NPDID 2610
6506/12-10 A
Exploration · Appraisal · P&A · Oil/gas · Den norske stats oljeselskap a.s · Åsgard · PL 094
Core 1
Core 1 of 6506/12-10 A was cut from 5,674 to 5,711.5 m, 37.5 m in the Tilje Fm and Åre Fm. The Directorate lists core samples from it as available.
- 37.5
- m cored · 5,674 to 5,711.5
- 8
- photographs
- 2
- tests and fluid samples across it
- 1
- formation boundary crossed
- 7
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
8 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
Tests and fluid samples across it
- DST 15,706.5 to 5,686 mOil 450 Sm³/d · gas 168,750 Sm³/d
- DST TEST1 sample5,686 to 5,706.5 m— · sample available: yes
Logs run across it
7 RUNS COVERING PART OF THE INTERVAL
- ZOVSP GRzero-offset vertical seismic profile · gamma ray2,800 to 6,175 m
- MRIL XDL DN DSLmagnetic resonance imaging log · digital spectral gamma ray5,248 to 5,880 m
- DPIL MAC ZDL CN SLH TTRMdual phase induction log · multipole array acoustic · compensated Z-densilog · compensated neutron · temperature, tension, and mud resistivity5,249 to 5,878 m
- DCBIL GRgamma ray5,260 to 6,202 m
- FMT QDYNE GRformation multi-tester · gamma ray5,273 to 5,842 m
- MWD DPRmeasurement while drilling · dual propagation resistivity5,553 to 5,781 m
- CBL VDL GRcement bond log · variable density log · gamma ray5,637 to 5,776 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/2610/cores/1, documented in the API reference.