NORWAY · WELLBORES · NPDID 2610

6506/12-10 A

Exploration · Appraisal · P&A · Oil/gas · Den norske stats oljeselskap a.s · Åsgard · PL 094

5 documents: reports, logs, and plots →

Core 8

Core 8 of 6506/12-10 A was cut from 6,057 to 6,060.7 m, 3.7 m in the Åre Fm. The Directorate lists core samples from it as available.

3.7
m cored · 6,057 to 6,060.7
1
photograph
5
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS6,0576,060.7 m6,058Åre Fm, 6,057 to 6,060.7 mÅre FmCore 8, 6,057 to 6,060.7 mCore 83.7 m6,057 to 6,060 m: 1 photo. Open.158.3 m not cored

Photographs of this core

1 PHOTO · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

What it was cut through

UnitFrom, mTo, mCore in it, m
Åre Fm6,0576,060.73.7

Every formation top in 6506/12-10 A →

Logs run across it

5 RUNS COVERING PART OF THE INTERVAL

  • ZOVSP GRzero-offset vertical seismic profile · gamma ray2,800 to 6,175 m
  • DCBIL GRgamma ray5,260 to 6,202 m
  • DPIL MAC SLH TTRMdual phase induction log · multipole array acoustic · temperature, tension, and mud resistivity5,845 to 6,259 m
  • ZDL CN TTRM GRcompensated Z-densilog · compensated neutron · temperature, tension, and mud resistivity · gamma ray5,845 to 6,259 m
  • FMT VPC CHT GRformation multi-tester · cable head tension · gamma ray5,926 to 6,197 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/2610/cores/8, documented in the API reference.