NORWAY · WELLBORES · NPDID 263

2/7-4

Exploration · Wildcat · P&A · Oil · Phillips Petroleum Company Norway · Edda · PL 018

3 documents: reports, logs, and plots →

Core 2

Core 2 of 2/7-4 was cut from 10,258 to 10,302 ft, 44 ft in the Ekofisk Fm. The Directorate lists core samples from it as available.

44
ft cored · 10,258 to 10,302
1
test or fluid sample across it
11
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 3,126.6 TO 3,140.1 M

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS10,25810,302 ft10,27010,28010,290Ekofisk Fm, 3,126.6 to 3,140 mEkofisk FmCore 2, 10,258 to 10,302 ftCore 244 ft

What it was cut through

UnitFrom, mTo, mCore in it, m
Ekofisk Fm3,126.63,14013.4

Every formation top in 2/7-4 →

Tests and fluid samples across it

  • DST 43,127 to 3,145 mOil 0 Sm³/d · gas 0 Sm³/d

Full test results for the well →

Logs run across it

11 RUNS COVERING PART OF THE INTERVAL

  • GRgamma ray107 to 3,351 m
  • BHCborehole-compensated sonic488 to 3,351 m
  • IESinduction electrical survey488 to 3,356 m
  • VELOCITYvelocity (check-shot) survey488 to 3,352 m
  • CBLcement bond log2,347 to 3,242 m
  • CBLcement bond log2,371 to 3,326 m
  • CDM2,429 to 3,355 m
  • GR NLgamma ray3,018 to 3,328 m
  • DL3,048 to 3,352 m
  • PML C3,049 to 3,356 m
  • FDCcompensated formation density3,061 to 3,355 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/263/cores/2, documented in the API reference.