NORWAY · WELLBORES · NPDID 264

2/7-5

Exploration · Appraisal · P&A · Shows · Phillips Petroleum Company Norway · Edda · PL 018

4 documents: reports, logs, and plots →

Core 4

Core 4 of 2/7-5 was cut from 10,367 to 10,417 ft, 50 ft in the Ekofisk Fm. The Directorate lists core samples from it as available.

50
ft cored · 10,367 to 10,417
2
tests and fluid samples across it
9
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 3,159.9 TO 3,175.1 M

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS10,36710,417 ft10,38010,39010,40010,410Ekofisk Fm, 3,159.9 to 3,175.1 mEkofisk FmCore 4, 10,367 to 10,417 ftCore 450 ft

What it was cut through

UnitFrom, mTo, mCore in it, m
Ekofisk Fm3,159.93,175.115.2

Every formation top in 2/7-5 →

Tests and fluid samples across it

  • DST 43,160 to 3,185 mOil 0 Sm³/d · gas 0 Sm³/d
  • DST 53,120 to 3,230 mOil 0 Sm³/d · gas 0 Sm³/d

Full test results for the well →

Logs run across it

9 RUNS COVERING PART OF THE INTERVAL

  • IESinduction electrical survey481 to 3,352 m
  • VELOCITYvelocity (check-shot) survey481 to 3,349 m
  • CBLcement bond log2,359 to 3,301 m
  • BHC Cborehole-compensated sonic2,432 to 3,349 m
  • CDM AP PP2,432 to 3,352 m
  • FDC CNLcompensated formation density · compensated neutron log2,432 to 3,352 m
  • DL2,957 to 3,349 m
  • CNLcompensated neutron log3,002 to 3,305 m
  • PML3,048 to 3,352 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/264/cores/4, documented in the API reference.