NORWAY · WELLBORES · NPDID 271

2/7-12

Exploration · Wildcat · P&A · Shows · Phillips Petroleum Company Norway · PL 018

3 documents: reports, logs, and plots →

What was run in 2/7-12 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

Logs you can open: composite and completion logs on file

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
ISF SONIC GR SPISF induction spherically focused log · SONIC sonic · GR gamma ray · SP spontaneous potential3321,835
VELOCITYVELOCITY velocity (check-shot) survey3321,835
DLL MSFL GR SP CALDLL dual laterolog · MSFL micro-spherically focused log · GR gamma ray · SP spontaneous potential · CAL caliper1,4021,835
FDC CNL GR CALFDC compensated formation density · CNL compensated neutron log · GR gamma ray · CAL caliper1,4021,835
HDTHDT high-resolution dipmeter1,4021,835

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30175361750LOT
Surf.cond.20335263411.63LOT
Interm.13 3/81,40217 1/21,4121.66LOT
Open hole—1,83212 1/41,8320LOT

Drilling mud

5 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
4391.08500waterbased
9801.28480waterbased
1,4121.55590waterbased
1,7461.78590waterbased
1,8821.78610waterbased

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/271, documented in the API reference.