NORWAY · WELLBORES · NPDID 2829

1/3-8

Exploration · Wildcat · P&A · Shows · Amoco Norway Oil Company · PL 011

4 documents: reports, logs, and plots →

What was run in 1/3-8 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
MULTI-ARM CALCAL caliper102,919
PRES GRADPRES pressure104,519
TEMP GR CCLTEMP temperature · GR gamma ray · CCL casing collar locator1004,524
MWD - GR RESMWD measurement while drilling · GR gamma ray · RES resistivity3101,105
TEMP GR CCLTEMP temperature · GR gamma ray · CCL casing collar locator1,0004,515
ZO VSPVSP vertical seismic profile1,0854,520
HDIL MAC GRHDIL high-definition induction log · MAC multipole array acoustic · GR gamma ray1,0983,445
ZDEN CN GRCN compensated neutron · GR gamma ray2,4253,445
DPIL ZDEN CN GRDPIL dual phase induction log · CN compensated neutron · GR gamma ray3,3504,528
HDIL CAL MAC GRHDIL high-definition induction log · CAL caliper · MAC multipole array acoustic · GR gamma ray3,4354,528
ZO VSPVSP vertical seismic profile4,3605,190
CBILCBIL circumferential borehole imaging log4,5154,627
HDIL MAC SLHDIL high-definition induction log · MAC multipole array acoustic · SL spectral gamma ray4,5154,905
HEXDIPHEXDIP six-arm dipmeter4,5154,905
ZDEN CN GRCN compensated neutron · GR gamma ray4,5154,905
FMTFMT formation multi-tester4,5304,894
ZDEN CN GRCN compensated neutron · GR gamma ray4,9025,198
CBIL HEXDIPCBIL circumferential borehole imaging log · HEXDIP six-arm dipmeter4,9035,188
HDIL MAC SLHDIL high-definition induction log · MAC multipole array acoustic · SL spectral gamma ray4,9035,186
RCOR4,9204,928
SWCSWC sidewall cores4,9205,181
FMTFMT formation multi-tester5,0055,172

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30303363100LOT
Pilot hole—3109 7/81,1050LOT
Surf.cond.201,098261,1050LOT
Interm.143,43517 1/23,4450LOT
Interm.9 5/84,51512 1/24,5290LOT
Liner7 5/84,9048 1/24,9100LOT
Open hole—5,0216 1/45,0210LOT

Drilling mud

35 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
3100.950water based
3512.14740oil based
1,1051.52460water based
1,5021.62440water based
1,9591.62440water based
2,4421.66450water based
2,4511.64430water based
2,4651.64460water based
2,6221.64550water based
2,9201.53280oil based
3,0451.64490water based
3,0651.64460water based
3,1991.64410water based
3,2001.64400water based
3,2971.64350water based
3,3661.64360water based
3,4101.53350oil based
3,4351.55290oil based
3,4451.64360water based
3,6871.55330oil based
4,1041.55360oil based
4,2421.55370oil based
4,2902.14740oil based
4,4011.68430oil based
4,4631.8560oil based
4,5001.81600oil based
4,5291.74370oil based
4,5311.03350oil based
4,6542540oil based
4,8662.04680oil based
4,9052.04600oil based
4,9602.1680oil based
5,0532.1680oil based
5,1792.1650oil based
5,2012.14740oil based

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/2829, documented in the API reference.