NORWAY · WELLBORES · NPDID 2872

33/9-19 A

Exploration · Appraisal · P&A · Oil · Den norske stats oljeselskap a.s · Sygna · PL 037

2 documents: reports, logs, and plots →

What was run in 33/9-19 A and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

Logs you can open: composite and completion logs on file

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, mComposite log for the well
DIL BHC GR AMSDIL dual induction log · BHC borehole-compensated sonic · GR gamma ray · AMS auxiliary measurement sonde1,9513,160On file: open →
LDL CNL GR AMSLDL litho-density log · CNL compensated neutron log · GR gamma ray · AMS auxiliary measurement sonde1,9513,144On file: open →
MWD - DPR IIMWD measurement while drilling · DPR dual propagation resistivity1,9523,514On file: open →

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Open hole—3,5148 1/23,5140LOT

Drilling mud

5 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
2,3141.62450Anco vert
2,7891.62350Anco vert
2,8381.68470Anco vert
2,9251.62400Anco vert
3,5141.63420Anco vert

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. The composite log is one file for the whole well. The Directorate does not say which runs or depths it draws on, so the link is the same on every row.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/2872, documented in the API reference.