Core 3
Core 3 of 2/6-5 was cut from 2,929 to 2,934.7 m, 5.7 m in the Tor Fm. The Directorate lists core samples from it as available.
- 5.7
- m cored · 2,929 to 2,934.7
- 2
- photographs
- 1
- test or fluid sample across it
- 8
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
2 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Tor Fm | 2,929 | 2,934.7 | 5.7 |
Tests and fluid samples across it
- DST 12,955 to 2,919 mOil 8 Sm³/d · gas 0 Sm³/d
Logs run across it
8 RUNS COVERING PART OF THE INTERVAL
- MWD - GR RES DIRmeasurement while drilling · gamma ray · resistivity · directional survey170 to 3,260 m
- VSPvertical seismic profile1,689 to 3,159 m
- PEX CMR ACTSPlatform Express (resistivity, density, neutron) · combinable magnetic resonance · auxiliary compression and tension sub2,423 to 3,257 m
- DSI DLL NGT GR ACTSdipole shear sonic imager · dual laterolog · natural gamma ray spectrometry · gamma ray · auxiliary compression and tension sub2,490 to 3,257 m
- FMIformation micro-imager2,490 to 3,257 m
- MDT GR ACTSmodular formation dynamics tester · gamma ray · auxiliary compression and tension sub2,800 to 2,968 m
- FMI GR ACTSformation micro-imager · gamma ray · auxiliary compression and tension sub2,832 to 2,993 m
- MDT GR AMSmodular formation dynamics tester · gamma ray · auxiliary measurement sonde2,832 to 2,993 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/2885/cores/3, documented in the API reference.