NORWAY · WELLBORES · NPDID 3042
35/11-10
Exploration · Appraisal · P&A · Oil/gas · Norsk Hydro Produksjon AS · Fram · PL 090
Core 5
Core 5 of 35/11-10 was cut from 2,268 to 2,296 m, 28 m in the Heather Fm and Fensfjord Fm. The Directorate lists core samples from it as available.
- 28
- m cored · 2,268 to 2,296
- 6
- photographs
- 1
- formation boundary crossed
- 5
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
6 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Heather Fm | 2,268 | 2,275 | 7 |
| Fensfjord Fm | 2,275 | 2,296 | 20.9 |
Logs run across it
5 RUNS COVERING PART OF THE INTERVAL
- MWD - GR RES DIRmeasurement while drilling · gamma ray · resistivity · directional survey375 to 2,950 m
- VSP GRvertical seismic profile · gamma ray450 to 2,920 m
- DLL MSFL LDL CNL NGT SP AMSdual laterolog · micro-spherically focused log · litho-density log · compensated neutron log · natural gamma ray spectrometry · spontaneous potential · auxiliary measurement sonde1,046 to 2,900 m
- FMS DSI GR AMSformation microscanner · dipole shear sonic imager · gamma ray · auxiliary measurement sonde1,139 to 2,932 m
- MDT GR AMSmodular formation dynamics tester · gamma ray · auxiliary measurement sonde2,036 to 2,870 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/3042/cores/5, documented in the API reference.