29/9-1
Exploration · Appraisal · P&A · Oil/gas · Norsk Hydro Produksjon AS · Martin Linge · PL 040
What was run in 29/9-1 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
Logs you can open: composite and completion logs on file
- Composite logpdf · 878 KB
- WDSS completion logpdf · 415 KB
- Completion logpdf · 3.7 MB
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m | Composite log for the well |
|---|---|---|---|
| ISF LSS GR SPISF induction spherically focused log · LSS long-spaced sonic · GR gamma ray · SP spontaneous potential | 213 | 4,703 | On file: open → |
| LDT CNL GR CALLDT litho-density tool · CNL compensated neutron log · GR gamma ray · CAL caliper | 1,039 | 4,703 | On file: open → |
| HDTHDT high-resolution dipmeter | 1,700 | 3,955 | On file: open → |
| CBL VDLCBL cement bond log · VDL variable density log | 1,858 | 3,925 | On file: open → |
| CSTCST sidewall core sample taker | 2,250 | 2,748 | On file: open → |
| CSTCST sidewall core sample taker | 2,922 | 3,695 | On file: open → |
| VSPVSP vertical seismic profile | 2,980 | 4,705 | On file: open → |
| CSTCST sidewall core sample taker | 3,698 | 3,950 | On file: open → |
| SHDTSHDT stratigraphic high-resolution dipmeter | 3,927 | 4,703 | On file: open → |
| CSTCST sidewall core sample taker | 3,950 | 4,321 | On file: open → |
| CSTCST sidewall core sample taker | 4,014 | 4,625 | On file: open → |
| CSTCST sidewall core sample taker | 4,026 | 4,595 | On file: open → |
| DLL MSFLDLL dual laterolog · MSFL micro-spherically focused log | 4,200 | 4,703 | On file: open → |
| CSTCST sidewall core sample taker | 4,336 | 4,704 | On file: open → |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 30 | 213.5 | 36 | 215 | 0 | LOT |
| Surf.cond. | 20 | 1,040.5 | 26 | 1,057 | 1.54 | LOT |
| Interm. | 13 3/8 | 2,724 | 17 1/2 | 2,751 | 1.91 | LOT |
| Interm. | 9 5/8 | 3,927 | 12 1/4 | 3,950 | 2.19 | LOT |
| Liner | 7 | 4,546 | 8 3/8 | 4,703 | 0 | LOT |
Drilling mud
22 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 250 | 1.06 | 48 | 0 | Water based |
| 450 | 1.1 | 48 | 0 | Water based |
| 565 | 1.04 | 30 | 0 | Water based |
| 905 | 1.06 | 32 | 0 | Water based |
| 1,050 | 1.11 | 47 | 0 | Water based |
| 1,250 | 1.12 | 53 | 0 | Water based |
| 1,550 | 1.13 | 50 | 0 | Water based |
| 1,750 | 1.14 | 47 | 0 | Water based |
| 1,920 | 1.2 | 49 | 0 | Water based |
| 2,000 | 1.25 | 49 | 0 | Water based |
| 2,120 | 1.26 | 46 | 0 | Water based |
| 2,220 | 1.32 | 45 | 0 | Water based |
| 2,250 | 1.38 | 52 | 0 | Water based |
| 2,300 | 1.39 | 52 | 0 | Water based |
| 2,400 | 1.38 | 52 | 0 | Water based |
| 2,750 | 1.42 | 56 | 0 | Water based |
| 3,700 | 1.5 | 45 | 0 | Water based |
| 3,810 | 1.53 | 46 | 0 | Water based |
| 3,860 | 1.8 | 52 | 0 | Water based |
| 3,950 | 1.97 | 47 | 0 | Water based |
| 4,050 | 1.98 | 30 | 0 | Water based |
| 4,150 | 2.02 | 26 | 0 | Water based |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. The composite log is one file for the whole well. The Directorate does not say which runs or depths it draws on, so the link is the same on every row.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/31, documented in the API reference.