NORWAY · WELLBORES · NPDID 320

15/6-5

Exploration · Appraisal · P&A · Shows · Esso Exploration and Production Norway A/S · Sleipner Vest · PL 029

4 documents: reports, logs, and plots →

What was run in 15/6-5 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

Logs you can open: composite and completion logs on file

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
VELOCITYVELOCITY velocity (check-shot) survey1663,822
ISF SONISF induction spherically focused log · SON sonic1673,822
MUD3703,824
CBLCBL cement bond log3721,165
CBLCBL cement bond log5051,143
TEMPTEMP temperature1,8002,738
CDM2,8393,823
FDC CNLFDC compensated formation density · CNL compensated neutron log2,8393,719
IESIES induction electrical survey3,2503,824

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30167361670—
Surf.cond.20374263850—
Interm.13 3/81,19817 1/21,2100—
Interm.9 5/82,84012 1/42,8530—
Open hole—3,8248 1/23,8240—

Drilling mud

8 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
3511.100waterbased
1,0821.100waterbased
1,2101.0900waterbased
2,0071.1300waterbased
2,5801.2100waterbased
3,2741.2500waterbased
3,4201.3200waterbased
3,6291.3700waterbased

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/320, documented in the API reference.