NORWAY · WELLBORES · NPDID 322
15/9-1
Exploration · Appraisal · P&A · Oil/gas · Den norske stats oljeselskap a.s · Sleipner Vest · PL 046
Core 3
Core 3 of 15/9-1 was cut from 3,557.5 to 3,567.7 m, 10.2 m in the Hugin Fm. The Directorate lists core samples from it as available.
- 10.2
- m cored · 3,557.5 to 3,567.7
- 6
- photographs
- 7
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
6 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Hugin Fm | 3,557.5 | 3,567.7 | 10.2 |
Logs run across it
7 RUNS COVERING PART OF THE INTERVAL
- FDC CNL GRcompensated formation density · compensated neutron log · gamma ray397 to 3,736 m
- ISF SONICinduction spherically focused log · sonic397 to 3,735 m
- VELOCITYvelocity (check-shot) survey620 to 3,734 m
- CBL VDL CCL GRcement bond log · variable density log · casing collar locator · gamma ray2,710 to 3,709 m
- HDThigh-resolution dipmeter2,846 to 3,736 m
- RFTrepeat formation tester2,856 to 3,690 m
- CPI3,499 to 3,725 m
Core and petrography reports on file for the well
- Biostratigraphy of core chip samplespdf · 6.6 MB
- Core 1-9pdf · 4.8 MB
- Core reportpdf · 1.3 MB
- Description of shows core 8 9pdf · 307 KB
- Geochemical analysis of additional core extractspdf · 7.1 MB
- Geochemical analysis of core & oil samplespdf · 8.7 MB
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/322/cores/3, documented in the API reference.