NORWAY · WELLBORES · NPDID 3250

15/3-6

Exploration · Wildcat · P&A · Dry · Amoco Norway Oil Company · PL 187

5 documents: reports, logs, and plots →

Core 1

Core 1 of 15/3-6 was cut from 2,140 to 2,158.1 m, 18.1 m in the Balder Fm and Intra Balder Fm Ss. The Directorate lists core samples from it as available.

18.1
m cored · 2,140 to 2,158.1
4
photographs
2
palynology slides made from core
1
formation boundary crossed
3
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,1402,158.1 m2,1452,1502,155Balder Fm, 2,140 to 2,155 mBalder FmIntra Balder Fm Ss, 2,155 to 2,158.1 mCore 1, 2,140 to 2,158.1 mCore 118.1 m2,140 to 2,145 m: 1 photo. Open.12,145 to 2,150 m: 1 photo. Open.12,150 to 2,155 m: 1 photo. Open.12,155 to 2,159 m: 1 photo. Open.1

Photographs of this core

4 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

What it was cut through

UnitFrom, mTo, mCore in it, m
Balder Fm2,1402,15515
Intra Balder Fm Ss2,1552,158.13.1

Every formation top in 15/3-6 →

Palynology slides made from core

2 IN THE INTERVAL

DepthLab codeIn
2,140 mRRIBalder Fm
2,150 mRRIBalder Fm

Logs run across it

3 RUNS COVERING PART OF THE INTERVAL

  • MWD - CDR RES GRmeasurement while drilling · compensated dual resistivity · resistivity · gamma ray217 to 2,278 m
  • MDTmodular formation dynamics tester1,246 to 2,560 m
  • CSTsidewall core sample taker1,560 to 2,767 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/3250/cores/1, documented in the API reference.