NORWAY · WELLBORES · NPDID 3280
6204/10-2 A
Exploration · Appraisal · P&A · Dry · Den norske stats oljeselskap a.s · PL 175
What was run in 6204/10-2 A and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
Logs you can open: composite and completion logs on file
- Composite logpdf · 226 KB
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m | Composite log for the well |
|---|---|---|---|
| MWD DPR-IIAMWD measurement while drilling · DPR dual propagation resistivity | 1,170 | 2,121 | On file: open → |
| CDL CND CHT GRCDL compensated densilog · CHT cable head tension · GR gamma ray | 1,842 | 2,288 | On file: open → |
| DLL MLL MAC SLH CHTDLL dual laterolog · MLL microlaterolog · MAC multipole array acoustic · CHT cable head tension | 1,850 | 2,290 | On file: open → |
| FMT CHT GRFMT formation multi-tester · CHT cable head tension · GR gamma ray | 2,099 | 2,205 | On file: open → |
Drilling mud
2 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 1,828 | 1.37 | 15 | 0 | Kcl/pac/phpa |
| 2,105 | 1.37 | 20 | 0 | Kcl/pac/phpa |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. The composite log is one file for the whole well. The Directorate does not say which runs or depths it draws on, so the link is the same on every row.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/3280, documented in the API reference.