NORWAY · WELLBORES · NPDID 334

16/3-2

Exploration · Wildcat · P&A · Dry · Norsk Hydro Produksjon AS · PL 007

16 documents: reports, logs, and plots →

What was run in 16/3-2 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
HRT2001,148
IESIES induction electrical survey4401,321
VELOCITYVELOCITY velocity (check-shot) survey4402,020
CSTCST sidewall core sample taker4701,310
BHC GRBHC borehole-compensated sonic · GR gamma ray1,3141,657
HDTHDT high-resolution dipmeter1,3142,020
IFS1,3141,660
BHC GRBHC borehole-compensated sonic · GR gamma ray1,321141
CSTCST sidewall core sample taker1,3252,010
CSTCST sidewall core sample taker1,3252,010
BHC GRBHC borehole-compensated sonic · GR gamma ray1,6572,019
IESIES induction electrical survey1,6572,019

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30190361910LOT
Surf.cond.20207262120LOT
Interm.13 3/844017 1/24450LOT
Interm.9 5/81,31412 1/41,3190LOT
Open hole—2,0198 1/22,0190LOT

Drilling mud

5 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
2001.0700sea water
4451.0600sea water
1,3191.1500waterbased
1,6591.22450waterbased
2,0191.28570waterbased

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/334, documented in the API reference.