NORWAY · WELLBORES · NPDID 338

17/11-2

Exploration · Wildcat · P&A · Dry · A/S Norske Shell · PL 010

9 documents: reports, logs, and plots →

Core 2

Core 2 of 17/11-2 was cut from 8,323 to 8,335 ft, 12 ft in the Skagerrak Fm. The Directorate lists core samples from it as available.

12
ft cored · 8,323 to 8,335
5
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 2,536.9 TO 2,540.5 M

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS8,3238,335 ft8,3258,330Skagerrak Fm, 2,536.9 to 2,540.5 mSkagerrak FmCore 2, 8,323 to 8,335 ftCore 212 ft

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Skagerrak Fm2,536.92,540.53.7

Every formation top in 17/11-2 →

Logs run across it

5 RUNS COVERING PART OF THE INTERVAL

  • SRS189 to 2,636 m
  • ISF SONIC GR SPinduction spherically focused log · sonic · gamma ray · spontaneous potential875 to 2,635 m
  • DLL MSFL GRdual laterolog · micro-spherically focused log · gamma ray1,150 to 2,631 m
  • FDC CNL GRcompensated formation density · compensated neutron log · gamma ray1,150 to 2,638 m
  • CDM1,307 to 2,627 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/338/cores/2, documented in the API reference.