NORWAY · WELLBORES · NPDID 342

18/10-1

Exploration · Wildcat · P&A · Oil · Elf Petroleum Norge AS · PL 008

8 documents: reports, logs, and plots →

Core 1

Core 1 of 18/10-1 was cut from 2,421 to 2,432.5 m, 11.5 m in the Bryne Fm. The Directorate lists core samples from it as available.

11.5
m cored · 2,421 to 2,432.5
4
photographs
1
test or fluid sample across it
7
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,4212,432.5 m2,4222,4242,4262,4282,430Bryne Fm, 2,421 to 2,432.5 mBryne FmCore 1, 2,421 to 2,432.5 mCore 111.5 m2,421 to 2,424 m: 1 photo. Open.12,424 to 2,427 m: 1 photo. Open.12,427 to 2,430 m: 1 photo. Open.12,430 to 2,432 m: 1 photo. Open.1

Photographs of this core

4 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

What it was cut through

UnitFrom, mTo, mCore in it, m
Bryne Fm2,4212,432.511.5

Every formation top in 18/10-1 →

Tests and fluid samples across it

  • DST 12,414 to 2,427 mOil 295 Sm³/d · gas 2,850 Sm³/d

Full test results for the well →

Logs run across it

7 RUNS COVERING PART OF THE INTERVAL

  • IEL BHCinduction electrical log · borehole-compensated sonic160 to 2,793 m
  • CNL CDL GRcompensated neutron log · compensated densilog · gamma ray168 to 2,795 m
  • VELOCITYvelocity (check-shot) survey405 to 2,791 m
  • DLL MLLdual laterolog · microlaterolog2,303 to 2,497 m
  • MFT2,416 to 2,479 m
  • MFT2,425 to 2,753 m
  • MFT2,430 to 2,465 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/342/cores/1, documented in the API reference.