NORWAY · WELLBORES · NPDID 3563

25/11-C-17 H

Development · Observation · Plugged · Not applicable · Esso Exploration and Production Norway A/S · Balder · PL 001

25/11-C-17 H was cored 2 times, 50.4 m in all between 2,197 and 2,247.4 m.

2
cores
50.4
metres cored in all
10
photographs of 2 cores

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Core log

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,1972,212.32,2002,2052,210Core 1, 2,197 to 2,212.3 m. Open the core.Core 115.3 m2,197 to 2,202 m: 1 photo. Open.12,202 to 2,207 m: 1 photo. Open.12,207 to 2,212 m: 1 photo. Open.12,247.4 m2,2152,2202,2252,2302,2352,2402,245Core 2, 2,212.3 to 2,247.4 m. Open the core.Core 235.1 m2,212 to 2,217 m: 1 photo. Open.12,217 to 2,222 m: 1 photo. Open.12,222 to 2,227 m: 1 photo. Open.12,227 to 2,232 m: 1 photo. Open.12,232 to 2,237 m: 1 photo. Open.12,237 to 2,242 m: 1 photo. Open.12,242 to 2,247 m: 1 photo. Open.1

Core by core

CoreTopBaseLengthInPhotosThin sectionsSlides from coreTestsSample available
Core 1 →2,197 m2,212.3 m15.3————Yes
Core 2 →2,212.3 m2,247.4 m35.1————Yes

Seeing the cores themselves

The cores are held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files each core as an interval and nothing against it. The log places everything else on file for the wellbore inside the core whose interval contains its depth: photographs by the interval in their title, thin sections and slides by their depth, tests by overlap, formations by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge of a core can belong to its neighbor. Only slides made from core are shown; slides from cuttings at the same depths are on the Samples tab.

Developers: this page as JSON is GET /v1/data/norway/wells/3563/cores, documented in the API reference.