NORWAY · WELLBORES · NPDID 358

25/2-6

Exploration · Appraisal · P&A · Oil shows · Elf Petroleum Norge AS · Hugin Satellitter · PL 026

10 documents: reports, logs, and plots →

Core 2

Core 2 of 25/2-6 was cut from 3,253.4 to 3,262.4 m, 9 m in the Hugin Fm and Sleipner Fm. The Directorate lists core samples from it as available.

9
m cored · 3,253.4 to 3,262.4
1
thin section in the interval
1
formation boundary crossed
8
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS3,253.43,262.4 m3,2563,2583,260Hugin Fm, 3,253.4 to 3,257 mHugin FmSleipner Fm, 3,257 to 3,262.4 mSleipner FmCore 2, 3,253.4 to 3,262.4 mCore 29 m

What it was cut through

UnitFrom, mTo, mCore in it, m
Hugin Fm3,253.43,2573.6
Sleipner Fm3,2573,262.45.4

Every formation top in 25/2-6 →

Thin sections in this interval

1 ON FILE

SectionDepthIn
43713,262.3 mSleipner Fm

Logs run across it

8 RUNS COVERING PART OF THE INTERVAL

  • HDThigh-resolution dipmeter742 to 3,747 m
  • ID750 to 4,625 m
  • FDC GR CNLcompensated formation density · gamma ray · compensated neutron log3,127 to 3,356 m
  • BHC GR ISFborehole-compensated sonic · gamma ray · induction spherically focused log3,128 to 3,356 m
  • CALcaliper3,128 to 3,750 m
  • GR SPECgamma ray3,128 to 3,750 m
  • ISFinduction spherically focused log3,128 to 3,799 m
  • DLL MSFLdual laterolog · micro-spherically focused log3,225 to 3,745 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/358/cores/2, documented in the API reference.