NORWAY · WELLBORES · NPDID 366
25/11-5
Exploration · Appraisal · P&A · Oil · Esso Exploration and Production Norway A/S · Balder · PL 001
What was run in 25/11-5 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
Logs you can open: composite and completion logs on file
- Completion logpdf · 1.3 MB
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m |
|---|---|---|
| DILDIL dual induction log | 396 | 2,162 |
| SGRSGR spectral gamma ray | 396 | 2,161 |
| VELOCITYVELOCITY velocity (check-shot) survey | 457 | 2,154 |
| DIPMETER | 1,397 | 2,162 |
| FDC CNLFDC compensated formation density · CNL compensated neutron log | 1,397 | 2,163 |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 30 | 187 | 36 | 190 | 0 | LOT |
| Surf.cond. | 13 3/8 | 397 | 17 1/2 | 411 | 0 | LOT |
| Interm. | 9 5/8 | 1,397 | 12 1/4 | 1,412 | 0 | LOT |
| Liner | 7 | 1,890 | 8 1/2 | 2,164 | 0 | LOT |
Drilling mud
3 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 188 | 0 | 0 | 0 | seawater/ge |
| 1,400 | 1.23 | 0 | 0 | seawater/lg |
| 2,163 | 1.22 | 0 | 0 | water/spers |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/366, documented in the API reference.