NORWAY · WELLBORES · NPDID 3683

6507/5-1

Exploration · Wildcat · P&A · Oil/gas/condensate · Amoco Norway Oil Company · Skarv · PL 212

5 documents: reports, logs, and plots →

Core 3

Core 3 of 6507/5-1 was cut from 3,422.1 to 3,449.8 m, 27.7 m in the Garn Fm and Not Fm. The Directorate lists core samples from it as available.

27.7
m cored · 3,422.1 to 3,449.8
6
photographs
3
palynology slides made from core
3
tests and fluid samples across it
1
formation boundary crossed
10
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS3,422.13,449.8 m3,4253,4303,4353,4403,445Garn Fm, 3,422.1 to 3,434 mGarn FmNot Fm, 3,434 to 3,449.8 mNot FmCore 3, 3,422.1 to 3,449.8 mCore 327.7 m3,422 to 3,427 m: 1 photo. Open.13,427 to 3,432 m: 1 photo. Open.13,432 to 3,437 m: 1 photo. Open.13,437 to 3,442 m: 1 photo. Open.13,442 to 3,447 m: 1 photo. Open.13,447 to 3,449 m: 1 photo. Open.1

Photographs of this core

6 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

What it was cut through

UnitFrom, mTo, mCore in it, m
Garn Fm3,422.13,43411.9
Not Fm3,4343,449.815.8

Every formation top in 6507/5-1 →

Palynology slides made from core

3 IN THE INTERVAL

DepthLab codeIn
3,431.6 mRRIGarn Fm
3,433.1 mRRIGarn Fm
3,448.3 mRRINot Fm

Tests and fluid samples across it

  • DST 2.13,430 to 3,442 mOil 178 Sm³/d · gas 741,000 Sm³/d
  • DST 2.23,430 to 3,514 mOil 148 Sm³/d · gas 580,000 Sm³/d
  • DST 2 sample3,430 to 3,442 mCondensate · sample available: yes

Full test results for the well →

Logs run across it

10 RUNS COVERING PART OF THE INTERVAL

  • ZO VSPvertical seismic profile2,180 to 4,130 m
  • USITultrasonic imager (cement and casing)3,100 to 3,700 m
  • AIT DSI GRarray induction tool · dipole shear sonic imager · gamma ray3,200 to 4,220 m
  • IPLT3,200 to 4,225 m
  • UBIultrasonic borehole imager3,228 to 4,210 m
  • MWD CDR GR RESmeasurement while drilling · compensated dual resistivity · gamma ray · resistivity3,239 to 4,224 m
  • MSCTmechanical sidewall coring tool3,251 to 4,132 m
  • CMR20003,350 to 3,800 m
  • MDTmodular formation dynamics tester3,381 to 3,873 m
  • MDTmodular formation dynamics tester3,406 to 3,770 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/3683/cores/3, documented in the API reference.