NORWAY · WELLBORES · NPDID 3756
6507/5-2
Exploration · Appraisal · P&A · Gas/condensate · Amoco Norway Oil Company · Skarv · PL 212
What was run in 6507/5-2 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
Logs you can open: composite and completion logs on file
- Composite logpdf · 492 KB
- Completion logpdf · 4.1 MB
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m | Composite log for the well |
|---|---|---|---|
| MWD CDR - DIRMWD measurement while drilling · CDR compensated dual resistivity · DIR directional survey | 454 | 1,050 | On file: open → |
| VSPVSP vertical seismic profile | 988 | 3,880 | On file: open → |
| MWD CDR - DIR ISONMWD measurement while drilling · CDR compensated dual resistivity · DIR directional survey | 1,050 | 1,964 | On file: open → |
| MWD CDR - RABMWD measurement while drilling · CDR compensated dual resistivity · RAB resistivity at the bit | 1,964 | 3,623 | On file: open → |
| PEX DSI AITB EMS GPIT ACTSPEX Platform Express (resistivity, density, neutron) · DSI dipole shear sonic imager · EMS environmental measurement sonde · GPIT inclinometry tool · ACTS auxiliary compression and tension sub | 1,964 | 3,623 | On file: open → |
| MDTMDT modular formation dynamics tester | 2,813 | 3,615.5 | On file: open → |
| MDTMDT modular formation dynamics tester | 2,813 | 3,864 | On file: open → |
| MSCT GRMSCT mechanical sidewall coring tool · GR gamma ray | 3,044 | 3,618 | On file: open → |
| ARI DSI MSFL GPIT ACTSDSI dipole shear sonic imager · MSFL micro-spherically focused log · GPIT inclinometry tool · ACTS auxiliary compression and tension sub | 3,550 | 3,897 | On file: open → |
| IPLT | 3,565 | 3,890 | On file: open → |
| ARI DSI MSFL EMS GPIT ACTSDSI dipole shear sonic imager · MSFL micro-spherically focused log · EMS environmental measurement sonde · GPIT inclinometry tool · ACTS auxiliary compression and tension sub | 3,600 | 3,901 | On file: open → |
| MWD - RABMWD measurement while drilling · RAB resistivity at the bit | 3,623 | 3,730 | On file: open → |
| MWD - DIR RABMWD measurement while drilling · DIR directional survey · RAB resistivity at the bit | 3,730 | 3,897 | On file: open → |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 30 | 450 | 36 | 450 | 0 | LOT |
| Surf.cond. | 20 | 1,053 | 26 | 1,054 | 1.45 | LOT |
| Interm. | 13 3/8 | 1,968 | 17 1/2 | 1,970 | 1.81 | LOT |
| Interm. | 9 5/8 | 3,602 | 12 1/4 | 3,603 | 0 | LOT |
| Open hole | — | 3,897 | 8 1/2 | 3,897 | 0 | LOT |
Drilling mud
9 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 407 | 1.08 | 0 | 0 | Seawater |
| 1,050 | 1.36 | 31 | 0 | Barasilc |
| 1,662 | 1.39 | 39 | 0 | Barasilc |
| 1,914 | 1.5 | 45 | 0 | Barasilc |
| 1,964 | 1.5 | 30 | 0 | Barasilc |
| 2,518 | 1.61 | 23 | 0 | Enviromul |
| 3,142 | 1.61 | 29 | 0 | Enviromul |
| 3,329 | 1.61 | 28 | 0 | Enviromul |
| 3,623 | 1.61 | 28 | 0 | Enviromul |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. The composite log is one file for the whole well. The Directorate does not say which runs or depths it draws on, so the link is the same on every row.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/3756, documented in the API reference.