NORWAY · WELLBORES · NPDID 385

30/7-2

Exploration · Wildcat · P&A · Oil/gas · Norsk Hydro Produksjon AS · Martin Linge · PL 040

24 documents: reports, logs, and plots →

Core 2

Core 2 of 30/7-2 was cut from 1,765.2 to 1,780 m, 14.8 m in the Frigg Fm. The Directorate lists core samples from it as available.

14.8
m cored · 1,765.2 to 1,780
1
test or fluid sample across it
7
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS1,765.21,780 m1,7661,7681,7701,7721,7741,7761,778Frigg Fm, 1,765.2 to 1,780 mFrigg FmCore 2, 1,765.2 to 1,780 mCore 214.8 m

What it was cut through

UnitFrom, mTo, mCore in it, m
Frigg Fm1,765.21,78014.8

Every formation top in 30/7-2 →

Tests and fluid samples across it

  • DST 21,765 to 1,777 mOil 0 Sm³/d · gas 0 Sm³/d

Full test results for the well →

Logs run across it

7 RUNS COVERING PART OF THE INTERVAL

  • CBLcement bond log1,660 to 1,830 m
  • BHC GRborehole-compensated sonic · gamma ray1,688 to 1,898 m
  • CNL FDCcompensated neutron log · compensated formation density1,688 to 1,898 m
  • DLL MSFLdual laterolog · micro-spherically focused log1,688 to 1,898 m
  • HDThigh-resolution dipmeter1,688 to 2,589 m
  • IESinduction electrical survey1,688 to 1,898 m
  • IESinduction electrical survey1,688 to 1,816 m

Logs, casing, and the files you can open →

Core and petrography reports on file for the well

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/385/cores/2, documented in the API reference.