Petrora

NORWAY · WELLBORES · NPDID 393

30/10-3

Exploration · Appraisal · P&A · Gas · Esso Exploration and Production Norway A/S · Odin · PL 030

6 documents: reports, logs, and plots →

Core 1

Core 1 of 30/10-3 was cut from 6,594 to 6,624 ft, 30 ft in the Hordaland Gp. The Directorate lists core samples from it as available.

30
ft cored · 6,594 to 6,624
11
palynology slides made from core
5
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 2,009.9 TO 2,019 M

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS6,5946,624 ft6,6006,6056,6106,6156,620Hordaland Gp, 2,009.9 to 2,019 mHordaland GpCore 1, 6,594 to 6,624 ftCore 130 ft

What it was cut through

UnitFrom, mTo, mCore in it, m
Hordaland Gp2,009.92,0199.1

Every formation top in 30/10-3 →

Palynology slides made from core

11 IN THE INTERVAL

DepthLab codeIn
6,597 ft—Hordaland Gp
6,600 ftGEOCHEMHordaland Gp
6,602 ft—Hordaland Gp
6,602 ft—Hordaland Gp
6,605 ft—Hordaland Gp
6,607 ft—Hordaland Gp
6,610 ft—Hordaland Gp
6,614 ft—Hordaland Gp
6,617 ft—Hordaland Gp
6,620 ft—Hordaland Gp
6,622 ft—Hordaland Gp

Logs run across it

5 RUNS COVERING PART OF THE INTERVAL

  • GRgamma ray129 to 2,235 m
  • IESinduction electrical survey701 to 2,235 m
  • SGR-Cspectral gamma ray701 to 2,235 m
  • HDThigh-resolution dipmeter1,524 to 2,238 m
  • FDC CNTcompensated formation density · compensated neutron tool1,937 to 2,237 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/393/cores/1, documented in the API reference.