NORWAY · WELLBORES · NPDID 397

30/11-2

Exploration · Wildcat · P&A · Dry · A/S Norske Shell · PL 035

3 documents: reports, logs, and plots →

What was run in 30/11-2 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

Logs you can open: composite and completion logs on file

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
GRGR gamma ray132438
B4381,213
BHC GRBHC borehole-compensated sonic · GR gamma ray4382,538
IESIES induction electrical survey4382,541
VELOCITYVELOCITY velocity (check-shot) survey4382,538
CDM1,2202,541
DDL MSFLMSFL micro-spherically focused log1,8292,590
FDC CNLFDC compensated formation density · CNL compensated neutron log1,8292,950

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30209362160—
Surf.cond.13 3/843817 1/24450—
Interm.9 5/81,22012 1/41,2290—
Open hole—2,5908 1/22,5900—

Drilling mud

4 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
2151.0600waterbased
4451.1300waterbased
1,2281.1200waterbased
2,5871.1800waterbased

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognise is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/397, documented in the API reference.