16/7-2
Exploration · Wildcat · P&A · Gas · Esso Exploration and Production Norway A/S · PL 072
Core 2
Core 2 of 16/7-2 was cut from 2,347 to 2,356.5 m, 9.5 m in the Heimdal Fm. The Directorate lists core samples from it as available.
- 9.5
- m cored · 2,347 to 2,356.5
- 2
- photographs
- 9
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
2 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Heimdal Fm | 2,347 | 2,356.5 | 9.5 |
Palynology slides made from core
0 IN THE INTERVAL
1 more slide was made from cuttings or sidewall cores at depths inside this interval, not from the core itself. Every slide from the well →
Logs run across it
9 RUNS COVERING PART OF THE INTERVAL
- CBLcement bond log82 to 2,473 m
- DLL MLLdual laterolog · microlaterolog82 to 2,472 m
- VELOCITYvelocity (check-shot) survey500 to 3,135 m
- IEL AC GR CALinduction electrical log · acoustic (sonic) · gamma ray · caliper1,120 to 2,391 m
- CDL CNLcompensated densilog · compensated neutron log1,192 to 2,528 m
- DIPdipmeter2,200 to 2,528 m
- IEL AC GR CALinduction electrical log · acoustic (sonic) · gamma ray · caliper2,285 to 2,527 m
- SWCsidewall cores2,290 to 2,521 m
- MFT2,295 to 2,422 m
Core and petrography reports on file for the well
- Well Core 1-4pdf · 814 KB
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/40/cores/2, documented in the API reference.