NORWAY · WELLBORES · NPDID 4147

31/4-11

Exploration · Wildcat · P&A · Oil/gas · Norsk Hydro Produksjon AS · Brage · PL 055

7 documents: reports, logs, and plots →

Core 14

Core 14 of 31/4-11 was cut from 2,376.7 to 2,395 m, 18.3 m in the Fensfjord Fm. The Directorate lists core samples from it as available.

18.3
m cored · 2,376.7 to 2,395
4
photographs
4
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,376.72,395 m2,3802,3852,390Fensfjord Fm, 2,376.7 to 2,395 mFensfjord FmCore 14, 2,376.7 to 2,395 mCore 1418.3 m2,376 to 2,380 m: 1 photo. Open.12,384 to 2,388 m: 1 photo. Open.12,388 to 2,392 m: 1 photo. Open.12,392 to 2,395 m: 1 photo. Open.1

Photographs of this core

4 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

What it was cut through

UnitFrom, mTo, mCore in it, m
Fensfjord Fm2,376.72,39518.3

Every formation top in 31/4-11 →

Logs run across it

4 RUNS COVERING PART OF THE INTERVAL

  • DSI VSPdipole shear sonic imager · vertical seismic profile2,000 to 2,835 m
  • MWD - GST VIS675 ADNmeasurement while drilling · azimuthal density neutron2,160 to 3,258 m
  • MDTmodular formation dynamics tester2,178 to 2,784 m
  • MDTmodular formation dynamics tester2,357 to 2,701 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/4147/cores/14, documented in the API reference.