NORWAY · WELLBORES · NPDID 417

33/12-1

Exploration · Wildcat · P&A · Oil · Mobil Exploration Norway INC · Statfjord · PL 037

5 documents: reports, logs, and plots →

Core 2

Core 2 of 33/12-1 was cut from 8,010 to 8,023 ft, 13 ft in the Brent Gp. The Directorate lists core samples from it as available.

13
ft cored · 8,010 to 8,023
10
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 2,441.5 TO 2,445.4 M

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS8,0108,023 ft8,0158,020Brent Gp, 2,441.4 to 2,445.4 mBrent GpCore 2, 8,010 to 8,023 ftCore 213 ft2.7 m not cored

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Brent Gp2,441.42,445.44

Every formation top in 33/12-1 →

Logs run across it

10 RUNS COVERING PART OF THE INTERVAL

  • IESinduction electrical survey451 to 3,062 m
  • VELOCITYvelocity (check-shot) survey451 to 3,058 m
  • CNLcompensated neutron log1,586 to 2,697 m
  • FDC CNLcompensated formation density · compensated neutron log1,586 to 3,057 m
  • BHC Cborehole-compensated sonic1,601 to 3,053 m
  • CDM1,601 to 3,063 m
  • CDM AP1,601 to 3,063 m
  • ML Cmicrolog1,601 to 2,696 m
  • ML MLLmicrolog · microlaterolog1,601 to 3,061 m
  • DLLdual laterolog2,286 to 2,691 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/417/cores/2, documented in the API reference.