NORWAY · WELLBORES · NPDID 4172
6407/7-6
Exploration · Wildcat · P&A · Gas/condensate · Norsk Hydro Produksjon AS · Njord · PL 107
6407/7-6 is a wildcat exploration wellbore in the Norwegian Sea, drilled by Norsk Hydro Produksjon AS, entered Oct 18, 2000, to 3,975 m in the Åre Fm.
Discovery 6407/7-6 · On the map →
- 3,975
- m total depth · 3,971 m vertical
- 336
- m water depth
- Oct 18, 2000
- entered · completed Dec 16, 2000
- Åre Fm
- at total depth · Early Jurassic
- 126.2
- m of core in 6 cores
- 148
- °C bottom-hole temperature
SODIR FACTPAGES · RECORD UPDATED NOV 4, 2026 · RELEASED DEC 16, 2002
On file for this wellbore
What the Directorate holds from this wellbore. Each opens the section that lists it.
Drilling
- Drilling facility
- SCARABEO 6 · Semisub steel
- Drilling days
- 60
- Kelly bushing elevation
- 26 m
- Maximum inclination
- 9.57999992°
- Drilling permit
- 985-L
- Licensing round
- 9
- Plugged and abandoned
- —
- Core samples available
- Yes
- Cuttings samples available
- Yes
- Position · ED50
- 64.29463° N, 7.10453° E
- Hydrocarbons in
- Tilje Fm · Early Jurassic
Well history
WRITTEN BY THE NORWEGIAN OFFSHORE DIRECTORATE
General
Well 6407/7-6 is located within Njord Unit on the western flank of the Njord Field. The northwest flank structure consists of five fault blocks defined by faults trending south-southwest and north-northeast, with throw towards west. The objective for the well 6407/7-6 was to test the hydrocarbon potential of the "B-segment" on the northwest flank of the Njord field. The primary target was to test the hydrocarbon potential of the Tilje formation of the Båt Group, while the hydrocarbon potential of the Ile Formation of the Fangst Group was a secondary target. There existed also a possibility of hydrocarbons in the Upper Jurassic Melke formation of the Viking Group, and in the Lower Cretaceous Lange Formation of the Cromer Knoll Group.
Operations and results
Wildcat well 6407/7-6 was spudded with the semi-submersible installation "Scarabeo 6" on 18 October 2000. First spud failed due to boulders and high angle in the hole. After a second spud on October 19 the well was first drilled to TD at 3930 m in the Early Jurassic Åre Formation. The TD was later extended to 3975 m to get space for test equipment. The extended TD was not logged. Shallow gas was not encountered. The well was drilled with water based bentonite mud down 1231 m and with oil based mud (Versavert) from 1231 m to TD. The main result of the well was the discovery of gas-condensate in the Tilje Formation as proven by a DST and by MDT fluid samples. The well penetrated 127 m Late Jurassic, 111 m Ile Formation, and 197 m Tilje Formation. The sands encountered in the Lange Formation, the Viking Group, and the Ile Formation were water bearing, but hydrocarbon shows were observed in the approximate 20 m net Lange sandstone and increasing amounts of background gas was measured while drilling in the upper part of the Ile Formation. The Tilje Formation was saturated with a heavy gas-condensate from 3693 m down to a Gas/Water Contact at 3777 m, determined from the resistivity log. S
Around this wellbore
This wellbore on Sodir FactPages → · Press release →
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Depths are metres along the wellbore from the kelly bushing unless a row gives its own unit; older cores are filed in feet. A zero the Directorate files for an unmeasured pressure, density, or temperature is shown as a dash.
Developers: this page as JSON is GET /v1/data/norway/wells/4172, documented in the API reference.