NORWAY · WELLBORES · NPDID 418

33/12-2

Exploration · Appraisal · P&A · Oil · Mobil Exploration Norway INC · Statfjord · PL 037

19 documents: reports, logs, and plots →

Core 2

Core 2 of 33/12-2 was cut from 8,870 to 8,901 ft, 31 ft in the Nansen Fm. The Directorate lists core samples from it as available.

31
ft cored · 8,870 to 8,901
1
test or fluid sample across it
10
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 2,703.6 TO 2,713 M

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS8,8708,901 ft8,8758,8808,8858,8908,895Nansen Fm, 2,703.6 to 2,713 mNansen FmCore 2, 8,870 to 8,901 ftCore 231 ft5.5 m not cored

What it was cut through

UnitFrom, mTo, mCore in it, m
Nansen Fm2,703.62,7139.4

Every formation top in 33/12-2 →

Tests and fluid samples across it

  • DST 32,701 to 2,704 mOil 284 Sm³/d · gas 37,095 Sm³/d

Full test results for the well →

Logs run across it

10 RUNS COVERING PART OF THE INTERVAL

  • CBLcement bond log465 to 2,905 m
  • BHCborehole-compensated sonic494 to 4,145 m
  • IESinduction electrical survey494 to 4,145 m
  • VELOCITYvelocity (check-shot) survey494 to 4,145 m
  • CDM1,597 to 4,145 m
  • CDM AP1,597 to 4,145 m
  • CDM PP1,597 to 4,145 m
  • FDC CNLcompensated formation density · compensated neutron log1,597 to 4,145 m
  • DLLdual laterolog2,438 to 2,903 m
  • ML MLLmicrolog · microlaterolog2,438 to 2,906 m

Logs, casing, and the files you can open →

Core and petrography reports on file for the well

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/418/cores/2, documented in the API reference.