NORWAY · WELLBORES · NPDID 4262
6406/1-1
Exploration · Wildcat · P&A · Gas/condensate · Den norske stats oljeselskap a.s · Kristin · PL 257
Core 2
Core 2 of 6406/1-1 was cut from 4,681.5 to 4,684.6 m, 3.1 m in the Tofte Fm. The Directorate lists core samples from it as available.
- 3.1
- m cored · 4,681.5 to 4,684.6
- 1
- photograph
- 8
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
1 PHOTO · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Tofte Fm | 4,681.5 | 4,684.6 | 3.1 |
Logs run across it
8 RUNS COVERING PART OF THE INTERVAL
- VSP GRvertical seismic profile · gamma ray4,140 to 4,970 m
- AIT DSI EMSarray induction tool · dipole shear sonic imager · environmental measurement sonde4,611 to 5,059 m
- IPLT4,611 to 5,059 m
- MWD - MPRmeasurement while drilling · multiple propagation resistivity4,611 to 5,057 m
- MDT GR ACTSmodular formation dynamics tester · gamma ray · auxiliary compression and tension sub4,669 to 5,045 m
- MDT GR ACTSmodular formation dynamics tester · gamma ray · auxiliary compression and tension sub4,679 to 4,690 m
- MDT GR ACTSmodular formation dynamics tester · gamma ray · auxiliary compression and tension sub4,679 to 5,048 m
- MSCT GRmechanical sidewall coring tool · gamma ray4,679 to 5,028 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/4262/cores/2, documented in the API reference.