NORWAY · WELLBORES · NPDID 427

34/10-4

Exploration · Appraisal · P&A · Oil · Den norske stats oljeselskap a.s · Gullfaks · PL 050

41 documents: reports, logs, and plots →

Core 6

Core 6 of 34/10-4 was cut from 2,350.5 to 2,356 m, 5.5 m in the Nansen Fm. The Directorate lists core samples from it as available.

5.5
m cored · 2,350.5 to 2,356
2
photographs
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,350.52,356 m2,3522,354Nansen Fm, 2,350.5 to 2,356 mNansen FmCore 6, 2,350.5 to 2,356 mCore 65.5 m2,350 to 2,353 m: 1 photo. Open.12,353 to 2,356 m: 1 photo. Open.1

Photographs of this core

2 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

What it was cut through

UnitFrom, mTo, mCore in it, m
Nansen Fm2,350.52,3565.5

Every formation top in 34/10-4 →

Palynology slides made from core

0 IN THE INTERVAL

2 more slides were made from cuttings or sidewall cores at depths inside this interval, not from the core itself. Every slide from the well →

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • ISF SONinduction spherically focused log · sonic222 to 2,597 m
  • VELOCITYvelocity (check-shot) survey620 to 2,705 m
  • CYBERLOOK1,693 to 2,597 m
  • FDC CNL GR CALcompensated formation density · compensated neutron log · gamma ray · caliper1,693 to 2,596 m
  • HDThigh-resolution dipmeter1,693 to 2,597 m
  • CYBERDIPcomputed dipmeter1,696 to 2,597 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/427/cores/6, documented in the API reference.