NORWAY · WELLBORES · NPDID 443

24/6-1

Exploration · Wildcat · P&A · Gas/condensate · Total Norge AS · PL 088

8 documents: reports, logs, and plots →

Core 1

Core 1 of 24/6-1 was cut from 2,181 to 2,182.6 m, 1.6 m in the Heimdal Fm. The Directorate lists core samples from it as available.

1.6
m cored · 2,181 to 2,182.6
1
photograph
8
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,1812,182.6 mHeimdal Fm, 2,181 to 2,182.6 mHeimdal FmCore 1, 2,181 to 2,182.6 mCore 11.6 m2,181 to 2,183 m: 1 photo. Open.12,296.4 m not cored

Photographs of this core

1 PHOTO · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

What it was cut through

UnitFrom, mTo, mCore in it, m
Heimdal Fm2,1812,182.61.6

Every formation top in 24/6-1 →

Logs run across it

8 RUNS COVERING PART OF THE INTERVAL

  • VELOCITYvelocity (check-shot) survey199 to 4,940 m
  • WSS D400 to 2,820 m
  • DIL LSS GRdual induction log · long-spaced sonic · gamma ray996 to 2,819 m
  • BGT GRborehole geometry tool · gamma ray1,500 to 2,756 m
  • LDL CNL NGSlitho-density log · compensated neutron log · natural gamma ray spectrometry1,595 to 2,820 m
  • SHDTstratigraphic high-resolution dipmeter1,595 to 2,821 m
  • BHC GRborehole-compensated sonic · gamma ray1,600 to 2,818 m
  • CBL VDLcement bond log · variable density log1,840 to 2,821 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/443/cores/1, documented in the API reference.