NORWAY · WELLBORES · NPDID 4451
6406/5-1
Exploration · Wildcat · P&A · Gas/condensate · A/S Norske Shell · PL 255
Core 2
Core 2 of 6406/5-1 was cut from 4,342 to 4,366.1 m, 24.1 m in the Ile Fm. The Directorate lists core samples from it as available.
- 24.1
- m cored · 4,342 to 4,366.1
- 6
- thin sections in the interval
- 9
- palynology slides made from core
- 9
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Ile Fm | 4,342 | 4,366.1 | 24.1 |
Thin sections in this interval
6 ON FILE
Palynology slides made from core
9 IN THE INTERVAL
Logs run across it
9 RUNS COVERING PART OF THE INTERVAL
- MWD - CDR RES GRmeasurement while drilling · compensated dual resistivity · resistivity · gamma ray2,691 to 4,692 m
- CSI GRgamma ray3,969 to 4,635 m
- ECRD ACTS IPLT AITauxiliary compression and tension sub · array induction tool4,106 to 4,501 m
- AIT DSI GRarray induction tool · dipole shear sonic imager · gamma ray4,109 to 4,645 m
- IPLT4,109 to 4,670 m
- CST GRsidewall core sample taker · gamma ray4,118 to 4,655 m
- MDT GRmodular formation dynamics tester · gamma ray4,210 to 4,681 m
- MDT GRmodular formation dynamics tester · gamma ray4,236 to 4,486 m
- MDT GRmodular formation dynamics tester · gamma ray4,336 to 4,497 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/4451/cores/2, documented in the API reference.