NORWAY · WELLBORES · NPDID 4463

30/9-20 S

Exploration · Wildcat · P&A · Oil · Norsk Hydro Produksjon AS · Oseberg Sør · PL 104

5 documents: reports, logs, and plots →

Core 2

Core 2 of 30/9-20 S was cut from 2,826.5 to 2,863.7 m, 37.2 m in the Tarbert Fm. The Directorate lists core samples from it as available.

37.2
m cored · 2,826.5 to 2,863.7
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,826.52,863.7 m2,8302,8352,8402,8452,8502,8552,860Tarbert Fm, 2,826.5 to 2,863.7 mTarbert FmCore 2, 2,826.5 to 2,863.7 mCore 237.2 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Tarbert Fm2,826.52,863.737.2

Every formation top in 30/9-20 S →

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • GR MSCTgamma ray · mechanical sidewall coring tool747 to 2,975 m
  • GR DSI OBMIgamma ray · dipole shear sonic imager · oil-base mud micro-imager2,000 to 3,124 m
  • GR VSPgamma ray · vertical seismic profile2,040 to 3,124 m
  • AIT IPLTarray induction tool2,362 to 3,124 m
  • MWD - RAB VPP ADNmeasurement while drilling · resistivity at the bit · azimuthal density neutron2,369 to 3,124 m
  • GR MDTgamma ray · modular formation dynamics tester2,746 to 2,934 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/4463/cores/2, documented in the API reference.