NORWAY · WELLBORES · NPDID 457
30/2-2
Exploration · Appraisal · P&A · Gas/condensate · Den norske stats oljeselskap a.s · Huldra · PL 051
Core 1
Core 1 of 30/2-2 was cut from 3,908 to 3,912.5 m, 4.5 m in the Heather Fm. The Directorate lists core samples from it as available.
- 4.5
- m cored · 3,908 to 3,912.5
- 1
- photograph
- 1
- palynology slide made from core
- 5
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
1 PHOTO · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Heather Fm | 3,908 | 3,912.5 | 4.5 |
Palynology slides made from core
1 IN THE INTERVAL
| Depth | Lab code | In |
|---|---|---|
| 3,908 m | GEOST | Heather Fm |
Logs run across it
5 RUNS COVERING PART OF THE INTERVAL
- CDL CNS GRcompensated densilog · gamma ray214 to 4,163 m
- DIL BCS CAL GRdual induction log · caliper · gamma ray214 to 4,164 m
- VELOCITYvelocity (check-shot) survey800 to 4,125 m
- CBLcement bond log3,600 to 4,127 m
- NGTnatural gamma ray spectrometry3,665 to 4,175 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/457/cores/1, documented in the API reference.